Problem with the Segue Editor.

matteolop

Member
Hi, I am using your latest version and I have encountered this problem with Segue Editor.
 

Attachments

  • Immagine 2025-03-15 014756.png
    Immagine 2025-03-15 014756.png
    69.3 KB · Views: 18
  • Immagine 2025-03-15 014741.png
    Immagine 2025-03-15 014741.png
    129.3 KB · Views: 18
it basically doesn't respect the MIX point of the second track (the one in the middle). And as you can see from track tool I put the IN and MIX points at the second 0, since it's an FX (separator) the two marks must be on the same position.
 

Attachments

  • Immagine 2025-03-15 014741.png
    Immagine 2025-03-15 014741.png
    131.6 KB · Views: 2
it basically doesn't respect the MIX point of the second track (the one in the middle). And as you can see from track tool I put the IN and MIX points at the second 0, since it's an FX (separator) the two marks must be on the same position.
Thank you for the information, we'll check if this is a bug.
 
Back
Top